SIMUL8 Professional 2008 - System Requirements
Below are the system requirements of SIMUL8 Professional 2008.
Operating Systems
SIMUL8 Corporation certifies that SIMUL8 Professional 2008 and all SIMUL8 Plug-in software Release 2008 are compatible with:
- Windows 95 (OSRa and above)
- Windows 98
- Windows ME
- Windows NT4 (service pack 3 and later)
- Windows 2000 Professional
- Windows 2000 Server
- Windows Server 2003
- Windows Server 2008
- Windows XP
- Windows XP 64
- Windows Vista
- Windows Vista 64
Minimum System Requirements
SIMUL8 Professional 2008 plus any plug-ins have the following hardware system requirements:
- Windows 95, 98, ME, NT 4, 2000, XP, Vista or higher
- 486/66 MHz Processor
- 256MB of available RAM greater then the minimum for your operating system.
- 120MB of available hard-disk space
- Mouse or equivalent pointing device
- CD-ROM drive for installation of boxed edition
This product must be activated over the Internet prior to use. Visit the Product Activation Center to learn more about activation.
Networks
SIMUL8 Professional 2008 can be installed onto, and run from, networked drives. But it does not run concurrently on multiple clients. See our Networked Concurrent License for this functionality.
Large Simulations
SIMUL8 Professional 2008 has been shown to be faster than many other top simulation packages. However you should be aware that most simulation studies involve some period of making "long runs" of simulations to get a measure of the long term performance and variability of the operation.
The faster the PC, the faster these results will be obtained. SIMUL8 uses disk space during simulation runs to store results information. A large simulation, running for a long period, will require additional disk space (more than recommended above).
Software Compatibility
SIMUL8 Professional 2008 2008 is certified compatible with VBA in Excel, Access, Word and Visio.
SIMUL8 Professional 2008 can connect to Microsoft Visio and read Visio files. To read Visio *.VDX files (the standard in Visio 2002 and above) Visio is not required. To read Visio *.VSD files (versions before 2002) Visio 5.0 or above must be installed.
|
